Sign In | Join Free | My himfr.com
Home > Engineering Adhesives >

6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue

    Buy cheap 6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue from wholesalers
     
    Buy cheap 6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue from wholesalers
    • Buy cheap 6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue from wholesalers

    6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue

    Ask Lasest Price
    Brand Name : HUIIAN
    Model Number : 6169
    Price : Negotiation
    Payment Terms : L/C, T/T
    Supply Ability : 100 TONS MONTH
    Delivery Time : 8-15 DAYS
    • Product Details
    • Company Profile

    6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue

    6168 wind blade structural adhesive is a two component epoxy adhesive, high-thixotropic, light green, high toughness, high strength epoxy adhesive.


    Typical use

    GRP and FRP adhesive such as fan blade mold, yachts, sports equipment.


    Characteristics before curing

    Typical values range

    A component

    Appearance light yellow high thixotropic paste

    Chemical Composition modified epoxy resin

    Density 23℃(GB/T 15223-2008) 1.27

    Viscosity (mPa.s) (GB/T 22314-2008) 470000

    B component

    Appearance light blue thixotropic paste

    Chemical Composition modified amine

    Density 23℃(GB/T 15223-2008) 1.20

    Viscosity (mPa.s) (GB/T 22314-2008) 450000


    Mixing characteristics

    Appearance light green thixotropic paste

    weight ratio A:B=100:50 A:B=100:52±2

    Operation time (min, 23℃) 199

    (DIN 16945-1989)

    Curing time (h, 75℃)6


    Characteristics after curing(23℃, 50%RH)

    Shear strength (MPa,Al-Al) (GB/T 7124-2008)

    3mm 24.6

    0.5mm 31.1

    Tensile strength (body, 23℃, MPa)58

    (ISO 527-2:1993) 44

    The tensile modulus (body, 23℃,GPa)

    (ISO 527-2:1993) 4.82

    T- peel strength(N/mm, Al-Al)(GB/T 1692-2008)

    3mm 4.42

    0.5mm 2.86

    distortion temperature(℃) 69

    (ISO 75-2-2004)

    glass transition temperature(℃) 75.4

    (ISO 11357-2-1997)

    flow(5℃-40℃): 5cmLift not sag


    Use Instructions

    Surface preparation: It can be directly used for non-porous surface. Porous or absorbent surface should be mixed with a resin liquid filled pores after class.


    Mixing: mix with weight ratio of A:B=100:50, the increase or decrease outside the allowance in the amount of curing agent will accelerate or reduce the rate of curing, leading to incompletely curing. This can not be modified again. A and B must be mixed very evenly, until no turbidity is visible. Yellow A andblue B can be visually recognized. Special attention should be paid to the bottom and wall of the mixing vessel. It is very difficult to mix a lot of glue by hand because of the high viscosity. Mixing equipment is necessary to ensure a larger amount of glue for industrial use.


    Curing: Mixed plastic should be at 20-30 ℃, the surface temperature of the adhesive material should be controlled not more than 35 ℃. Before curing, remove the excess glue from the surface sticky. The curing process, the components should be heated slowly so that the internal stress of the adherend to a minimum. Thick layer (greater than 10mm) colloidal curing, need to consider a phased temperature curing in order to control the impact of concentrated heat. Temperature test center by layer, helping to set procedures to improve production efficiency and performance of the adhesive.


    Security

    Please refer to the MSDS for detailed safety Information.


    Package

    Order code: Shanghai

    A 6168 200kg/ barrel, 2 barrels / box.

    B 6168 200kg/ barrel, 2 barrels / box.


    Storage

    Stored in a cool, dry place at 8-28℃ for 24 months
    .6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue

    Quality 6168 Structural AB epoxy adhesive for wind blade , thixotropy Industrial strength glue for sale
    Inquiry Cart 0
    Send your message to this supplier
     
    *From:
    *To: Shanghai Huitian New Material Co., Ltd
    *Subject:
    *Message:
    Characters Remaining: (0/3000)